Twitter Follow Button

Instagram

Tuesday 26 March 2013

NVIDIA Graphics card, display brightness not changing

UPDATE : The new drivers have fixed the issue. Please see this post for more Informaiton

Have an Nvidia Graphics driver and cannot change your brightness? I also had the same problem after upgrading my Lenovo G460 to Windows 8 Pro. I contacted Nvidia and they have given me the solution. Here are the steps to follow to enable your brightness setting:

1) Download the latest 314.21 beta driver (haven't  tested this on the current driver) here: http://www.geforce.com/drivers/results/59436 and perform a clean install.
2) check if "Enable adaptive brightness" option is enabled and if yes try turning it off to see if that will help. This option is located under the Windows 8 power options. You can access it via the Windows control panel > Power Options > Change plan settings (which ever plan is active) > Change advanced power settings > Display > Enable Adaptive Brightness.

3) Check if you are able to change your brightness.

3) If the "Enable adaptive brightness" option does not impact issue then try following the steps below to add a registry and see if that helps.

4) How to add registry key:

1. Make sure you are running the 314.21 driver.
2. Download the "DispRegEdit.exe" tool from http://goo.gl/f0wUt to your local system. This tool will take you directly to the registry location where all the graphics drivers registry entries are stored.
3. Run the "DispRegEdit.exe" tool. It should bring up the registry editor and take you directly to the location where all the NVIDIA driver settings are store.
4. Create a new key by right-clicking on the right-hand pan of the registry editor window and then select "New" > "DWORD (32-bit) Value".
5. Label the name of the new key as "RMBrightnessControlFlags".
6. Once key has been created, double click the new key and then add the "0x800" to Value data area. Click OK to save.
7. Restart Windows.
8. Check brightness control again

5) This solution is for selected laptop models. If this did not work for you, here's an extract from my Personal Assistance question -

--------------------------------------------------------------------------------------------------------------------------
That should be fine but it may be best if the other users impacted by this problem submit a bug to NVIDIA. Again the registry key will be targeted for specific laptop models only so unless we know which laptop model is impacted it will not be added to our future drivers. Adding this registry key is more a temporary workaround until we can get this fixed in a future driver. Have other users submit a bug to the link below with "[For Ray]" in the subject so I can pick those up. Have user include the following information in the bug submission.

1. Brand/model of the laptop.
2. Run dxdiag.exe and save log. Upload the log with the submission.

http://nvidia-submit.custhelp.com/cgi-bin/nvidia_submit.cfg/php/enduser/std_alp.php


--------------------------------------------------------------------------------------------------------------------------

6) My friend Ray will help you with your brightness problems or any other problems with your display drivers. Mine took a lot of time to be solved but don't worry, we now know the right solution for mostly all systems having an Nvidia graphics card.

58 comments:

  1. The above link to the NVIDIA registry entries does not work. Could you please provide an alternative way of downloading this. A search with Google did not show any alternative download-option.

    Thanks & best regards!

    ReplyDelete
    Replies
    1. Thanks for notifying Micha. The link has been updated. Please try downloading it now.




      Thanks,
      Nik.

      Delete
    2. Please share and spread the news if this solution works.


      Thanks,
      Nik.

      Delete
  2. Hi Nikhil,

    I having brighness issue with my AMD 7450, where in windows 7 brightness slider doesn't appear in power option; in windows 8 charm brightness option simply grey out(unavailable)

    do you think that registry key work on AMD too?

    ReplyDelete
    Replies
    1. It should probably work. Make sure that you update to the latest version as above and try it. Please tell me if it works. If not, I'll be happy to further assist you..


      Thanks,
      Nik.

      Delete
  3. Thanks man! That helps a lot!

    ReplyDelete
    Replies
    1. Did this solution work for you? Please share and tell your friends about it. I don't want anybody to have this problem again.



      Thanks,
      Nik.

      Delete
  4. This worked for my late-2008 nvidia 9400m unibody Macbook! Been trying to fix this problem for a LONG time!

    Here's what I did:

    1. Uninstall old nVidia drivers.

    2. Install Driver Fusion 1.6.0

    3. Restart into Safemode (F8 before Windows splash screen).

    4. Run Driver Fusion and remove all nVidia registry settings left over from uninstall.

    5. Restart into Windows normally

    6. Install WHQL approved 314.22 drivers for Windows 7

    7. Restart

    8. Run DispRegEdit.exe and enter the following two entries:

    I. Add a new DWORD called "EnableBrightnessControl" and set the value to 1.

    II. Add a new DWORD called "RMBrightnessControlFlags" and set the value to 800.

    9. Restart and enjoy brightness settings again!

    Thanks for the advice Nikhil, I hope this helps others.

    ReplyDelete
    Replies
    1. Thanks Mike! That sure should help Mac users.

      Delete
    2. This comment has been removed by the author.

      Delete
    3. At last! I installed the last driver (340.52) and do registry tricks of point 8. It works! Really thanks!

      Delete
    4. Thanks, i only missed the RMBrightnessControlFlags entry, a simple disable and enable of the display adapter did the trick, now screen brightness settings are working fully, even the dynamic settings.
      Super

      Delete
  5. I can't type the letter x for "0x800" in the value data area. Can you help me please?

    ReplyDelete
    Replies
    1. Did you try to copy and paste the value from the instructions? Please note that you need to double click and add the value in the popup box. Please remember that it should be a "DWORD (32-bit) Value". Try these steps again and tell me if it works.

      Thanks.

      Delete
  6. Hi im having this problem on my window xp(64) my nvidia current and latest version is 307.83. do you have any idea dealing with xp?

    ReplyDelete
    Replies
    1. Update to 314.21 and try to follow the steps given here.
      If it does not work, contact NVidia. Click on the link in the post and log in/Create account on the website. You can submit your questions and you will get a reply within 24 hours.

      Delete
  7. This works for me. I've faced this problem before e year on my Acer 8930 with NVidia 9600M and Windows 8 Pro x64.

    Thank you Nik!

    ReplyDelete
    Replies
    1. You're most welcome! Share this with your friends if they have the same problem...

      Delete
  8. It didn't work for me. I'm using Sony vaio VPCEH25EN and NVIDIA GeForce 410M
    Version:9.18.13.2702 Date:8-30-2013 with Windows 8 Pro 64bit!
    Thanx

    ReplyDelete
    Replies
    1. Hi! Did you update to 314.21 beta driver? This solution might not work on other versions. Please keep me updated!

      Delete
  9. Thanks to this blog, I managed to fix my problem on my Late 2010 Macbook Air 13 inch laptop (Nvidia 320M graphics chipset). I hacked boot camp plist.info so that it would create a USB install for my laptop on Mavericks. Then created the Windows partition, formatted it and installed Windows 7 Ultimate. I then had issues with wake from sleep (black screen, couldn't see anything, but sound volume buttons when pressed had sound, so i knew it was working, but display drivers not working correctly).

    So I installed Nvidia drivers from their website, version 340.43 beta . This solved the wake from sleep issue, but then I couldn't get the brightness controls to work. Then I simply downloaded DispRegEdit, and added the following 2 lines:

    1. A new DWORD called "EnableBrightnessControl" and set the value to 1.

    2. A new DWORD called "RMBrightnessControlFlags" and set the value to 800.


    Rebooted and now everything is working!

    Thanks to everyone, especially Nikhil!

    ReplyDelete
  10. Hey Nikhil,

    First of all thank you for your instructions.

    Unfortunately it does not work properly for me.

    1) Addition of DWORD "EnableBrightnessControl" with a value of 1 to registry:
    Now I can change the brightness in the mobility center, HOWEVER the brightness will only be adjusted if the left mouse key is pressed. Once the left mouse key is no longer pressed, the slider and hence the brightness jumps back to the original position/ setting. Values of 2,3,4,... haven't worked neither.
    Moreover the brightness scale (low brightness, high brightness) is inverted.

    2) Additional to step 1, addition of DWORD "RMBrightnessControlFlags" with a value of 800:
    The slider can be adjusted (it does not jump back after release of the mouse key), unfortunately in this case the brightness adjustment is again not working.

    I had already a conversation with Nvidia through their support page about that. They told me that this could be a driver bug. Unfortunately they do not reply to me since March....

    Do you have any ideas?

    Thanks,
    Peter

    ReplyDelete
    Replies
    1. Hello Peter!

      To help you further, may I know your laptop/computer model and your graphics card model? Some models require specific workarounds.

      Thanks!

      Delete
    2. I have an Asus Zenbook UX51VZ, it has a Geforce GT 650M and Windows 7 64-bit.

      Thanks!

      Delete
    3. Hi!

      Thanks for that info. I think this is due to the bloatware installed by Asus. You have to check their website for specific driver updates for your model. If you find it, perform a clean install so anything buggy is removed.

      Delete
    4. I have performed a clean install with the driver from the Asus website, but it does not work. Same with any of the newer Nvidia drivers.

      Delete
  11. This comment has been removed by the author.

    ReplyDelete
  12. hi i have a late 2009 imac and when i install the latest nvidia driver ,the 340.52 WHQL , i cant controll the brightness and its unbearable,rolling back the driver sorts it out but is there any fix?

    ReplyDelete
    Replies
    1. You should keep the version that lets you control the brightness. If these steps do not work, you should contact Nvidia support with complete details of your system and driver.

      Delete
  13. graphics card is a nvidia ge force 9400,windows 7 64bit

    ReplyDelete
  14. Thank you so so much Nikhil !
    Working on asus g56 rog series.

    ReplyDelete
  15. Dear Nikhil,
    The solution is not work for me T T Please help.

    I am using Macbook Late2008 installed Window7 32bit Driver 340.52
    I have tried to do these 1. A new DWORD called "EnableBrightnessControl" and set the value to 1.

    2. A new DWORD called "RMBrightnessControlFlags" and set the value to 800.

    but it's still not work.

    I have checked in the Windows Mobility Center, I cannot seen any button or slide to adjust the brightness here.

    Thank you in advance,

    ReplyDelete
    Replies
    1. This comment has been removed by the author.

      Delete
    2. It's work now!!
      I deleted that 2 step and repeat it, restart , then it just work !

      Thank you so much

      Delete
  16. Aloha,
    I have Sony Vaio desktop, i7, Win8 64, Nvidia GeForce GT620M (2G). I just spent 7 hours on the phone with Sony, trying to fix this. We did constantly check the power options (instead of the charms icon), with no result, no slider bar. I did see him try to change values in the registry, but no slider. He will be calling back tomorrow at noon, to restore the computer to its beginnings, unless I can give him a fix. Could you possibly list the order of what he should try? Honest, 7 hours.

    ReplyDelete
  17. The things you should try first -

    1) Upgrade to the latest drivers.
    2) If that doesn't work, follow the instructions above to add the registry key.
    3) Try rolling back to a previously working driver.
    4) Directly contact Nvidia.

    I sincerely hope your problem is solved after all that hardwork.

    ReplyDelete
  18. Excellent and helpful post… I am so glad to left comment on this. This has been a so interesting read, would love to read more here….
    geforce graphics card

    ReplyDelete
  19. Still works on Windows 10 Creators Update on MacBookPro mid2012 with nvidia gt 650M.
    just add the 2 registry keys, reboot and brightness works,
    if the screen is quite dim, disable the adaptive screen brightness setting in windows 10. and the screen will go full bright.

    thanks a lot, i searched quite a while before i found this one !!!!

    ReplyDelete
  20. Thanks for providing this wonderful information for gamers who are facing problems with their Nvidia Graphics card. There are many gamers who are striving to find the best gaming gadgets under a tight budget and for such gamers I have a better suggestion. You should check this list of graphics cards under 200 before buying a graphics card. I bet you will find the best one for your needs.

    ReplyDelete
  21. Hello an many thanks,

    My MacBook 13, aluminium, end 2008 have the same problem. I instal Windows 7 Ultimate 32- bit with bootcam and I update the NVIDIA driver and suddenly didn´t work the F1 F2 keys for brigthness (I only could change the brigthness with NVDIA panel; "Use the NVIDIA configuration").

    The driver is 342.01

    I follow this steps

    I downloaded DispRegEdit, and I added the 2 lines:

    1. A new DWORD called "EnableBrightnessControl" and set the value to 1.

    2. A new DWORD called "RMBrightnessControlFlags" and set the value to 800.

    Restart...

    And, perfect!!!

    All works

    Thanks to all, still working :)

    ReplyDelete
    Replies
    1. Pero , es controlador de video o es solo para eso porque yo quiero jugar juegos y nose si le va lo que has dicho hace 3 aƱos

      Delete
  22. Hi there! This article could not be written any better! Reading through this post reminds me of my previous roommate! He continually kept preaching about this. I'll forward this post to him. Pretty sure he'll have a very good read. Thank you for sharing!
    http://buyfore.com/smart-wrist-fitness-band-sleep-monitor-step-counter/

    ReplyDelete
  23. Hola tengo un macbook white 5.2 FINALES DEL 2009 Y CON LOS GRAFICOS DE LA TARJWTA NVIDIA GFORCE 9400M SOLO CON INSTALAR LA PANTALLA VA A NEGRO Y ME REINICIA AYUDA POR FAVOR

    ReplyDelete
  24. Wow, downloading DispRegedit and adding the RMBrightnessControlFlags entry as noted by other posters like des.frankenstein worked like a charm. The EnableBrightnessControl was in there already, but the 2nd one was not. Many Thanks!!

    ReplyDelete
  25. I am facing the same issue with GTX 1080 and i am using Acer H277HU 27-inch With USB-C Monitor, i feel like my LED is showing errors

    ReplyDelete
  26. We interactively display visualizations on any device. Downloading large data is avoided with thin computing-style delivery model. Bandwidth and latency limitations are overcome through patented interactive remote visualization over Internet. The knowledge within enormous data is unleashed using A.I. on proprietary supercomputing cloud infrastructure. Graphics Processing Unit (GPU): Supercomputing Power at Fraction of the Cost. Internet latency issues remain the challenging factor for the growth, that in order for cloud gaming to work, a gamer has to be close in proximity to the server that serves the content. With our patents and technologies, this limitation is eliminated allowing secure and fast access to gaming contents.

    Interactive Streaming AI Platform RIS PACS

    ReplyDelete
  27. This is my first time i visit here and I found so many interesting stuff in your blog especially it's discussion, thank you. https://pcreviewer.org

    ReplyDelete
  28. Great post, and great website. Thanks for the information! https://pcreviewer.org

    ReplyDelete
  29. Nice post. I learn something totally new and challenging on websites I stumbleupon every day. It's always useful to read through articles from other authors and practice something from other sites.
    https://beyondvela.com/

    ReplyDelete
  30. Such a valuable post. Graphic cards issues can be irritating but an experienced person can clear this issue. We do quite a lot of HP laptop service and this post was very informative and useful for me. Thank you.

    ReplyDelete
  31. "https://gccgamers.com/computer-parts-components/graphic-cards/asus-rog-strix-geforce-rtx-3080ti-oc-o12g-gaming-12gb-384bit-gddr6x-graphics-card-90yv0gt1-m0nm00.html
    RTX 3080 Ti in UAE, Asus ROG Strix GeForce RTX 3080Ti in UAE, 12GB Graphics Card in UAE"

    ReplyDelete
  32. Now you can easily find out Xnxubd 2019 Frame Rate and get it online.

    ReplyDelete
  33. I have read your blog regarding graphic card. It is very informative and helpful for me.

    ReplyDelete